Esco | Radioisotope™

Frontier™ Radioisotope™

Esco Frontier Radioisotope Fume Hood is designed to be used when handling radioactive materials. This specialized fume hood is built with stainless steel internal surfaces (including the work surface) with coved seamless welded corners for easy cleaning and decontamination. Frontier Radioisotope fume hoods have been engineered to provide maximum safety while using low level Alpha and lower level Beta particles. In addition, these hoods provide containment performance similar to that of high performance low velocity fume hoods.

Key Benefits:

UL classified
Smooth coved corners
Reinforced worksurface
Excellent aesthetics
5 degree sloped front
Superior containment at 0.3m/s
High energy savings

Disclaimer: Esco Frontier^TM is UL classified. Due to the custom nature of the range, some options do not qualify for the UL label.

ขอใบเสนอราคา

ลงทะเบียนการรับประกัน

อื่นๆ Laboratory Fume Hoods

Superstructure

Tri-wall construction for maximum robustness.
Internal chamber constructed of stainless steel 304 with coved corners. Option to upgrade to stainless steel 316 is available.
Chain and Sprocket Sash support system.
Hood lighting is pre-wired. Lighting is electronically ballasted, energy efficient, instant start. Typical light intensity on work surface is > 1076 lux in zero ambient conditions.
Reinforced work surface can hold loads of up to 15 kN/m² (2.175 lbf/in2).

Safety Features

Shaping vanes increase airflow "sweep" at the critical area at the sidewall to improve containment, especially when laboratory personnel walk fast in front of the hood.
Sash stop limits sash movement beyond 457mm (18"), 'encouraging' user to work at safe positions.
When sash is raised above 457mm (18"), it will automatically and gently fall back to the safe level (Esco's creep-down mechanism) unless held in place. This allows the sash to be raised temporarily to the full open position for set up of equipment and apparatus in the hood, while enforcing regular operation of the hood with lowered sash.
The sash creep-down mechanism can only be disabled with a key. This permits the laboratory manager or safety officer to restrict operations at sash openings above 457mm (18.0").
Sash key lock allows the laboratory manager to restrict access to fume hood.
The sash can also be locked down in the fully closed position with the key , in the event of a fume hood fault, facility shutdown, or, simply to restrict access to equipment set up in the hood.

Serviceability

Stainless steel internal work zone allows for easy cleaning of all surfaces.
Removable baffle system allows for thorough cleaning inside the hood.
Chain and sprocket system requires minimal service.

Safety Certified and Tested

All Esco fume hoods are manufactured for the most demanding laboratory applications.
Each Frontier Acid Digestion Fume Hood is tested to comply with ASHRAE 110:1995 and EN14175-3 standards.
Sash is clearly labeled with operating instructions and illustrations.

Model	220-240 VAC, 50-60 Hz, 1Ø	EFI-4UD4CW-8 2090081	EFI-4UD6CW-8 2090082	EFI-5UD4CW-8 2090171	EFI-5UD6CW-8 2090174	EFI-6UD4CW-8 2090172	EFI-6UD6CW-8 2090175
		EFI-4UD4VW-8 2090177	EFI-4UD6VW-8 2090181	EFI-5UD4VW-8 2090178	EFI-5UD6VW-8 2090182	EFI-6UD4VW-8 2090179	EFI-6UD6VW-8 2090183	EFI-8UD4VW-8 2090180	EFI-8UD6VW-8 2090184
	110-120 VAC, 50-60 Hz, 1Ø	EFI-4UD4CW-9 2090xxx	EFI-4UD6CW-9 2090xxx	EFI-5UD4CW-9 2090xxx	EFI-5UD6CW-9 2090xxx	EFI-6UD4CW-9 2090xxx	EFI-6UD6CW-9 2090xxx
		EFI-4UD4VW-9 2090xxx	EFI-4UD6VW-9 2090xxx	EFI-5UD4VW-9 2090xxx	EFI-5UD6VW-9 2090xxx	EFI-6UD4VW-9 2090xxx	EFI-6UD6VW-9 2090xxx	EFI-8UD4VW-9 2090xxx	EFI-8UD6VW-9 2090xxx
Nominal Size		1.2 meter (4’)		1.5 meter (5’)		1.8 meter (6’)		2.4 meter (8’)
External Dimensions (W x D x H)		1220 x 900 x 1725 mm (48.0” x 35.4”x 67.9”)		1525 x 900 x 1725 mm (60.0” x 35.4”x 67.9”)		1830 x 900 x 1725 mm (72.0” x 35.4”x 67.9”)		2440 x 900 x 1725 mm (96.0” x 35.4”x 67.9”)
Internal Work Area (W x D x H)		996 x 672 x 1240 mm (39.2” x 26.5”x 48.8”)		1301 x 672 x 1240 mm (51.2” x 26.5”x 48.8”)		1606 x 672 x 1240 mm (63.2” x 26.5”x 48.8”)		2216 x 672 x 1240 mm (87.2” x 26.5”x 48.8”)
Face Velocity	Sash Opening	Exhaust volume / static pressure required
0.3 m/s (60 fpm)	457 mm (18.0”)	542 cmh at 7 Pa 319 cfm at 0.03" WG		705 cmh at 9 Pa 415 cfm at 0.04" WG		867 cmh at 12 Pa 510 cfm at 0.05" WG		1192 cmh at 8 Pa 702 cfm at 0.03" WG
0.4 m/s (80 fpm)		723 cmh at 13 Pa 425 cfm at 0.05" WG		939 cmh at 17 Pa 553 cfm at 0.07" WG		1156 cmh at 20 Pa 681 cfm at 0.09" WG		1590 cmh at 14 Pa 936 cfm at 0.06" WG
0.5 m/s (100 fpm)		903 cmh at 20 Pa 532 cfm at 0.09" WG		1174 cmh at 26 Pa 691 cfm at 0.11" WG		1445 cmh at 28 Pa 851 cfm at 0.12" WG		1987 cmh at 22 Pa 1170 cfm at 0.09" WG
0.3 m/s (60 fpm)	736 mm (29.0”)	642 cmh at 13 Pa 378 cfm at 0.06" WG		834 cmh at 17 Pa 491 cfm at 0.07" WG		1027 cmh at 22 Pa 605 cfm at 0.09" WG		1412 cmh at 14 Pa 831 cfm at 0.06" WG
0.4 m/s (80 fpm)		856 cmh at 23 Pa 504 cfm at 0.10" WG		1113 cmh at 30 Pa 655 cfm at 0.13" WG		1369 cmh at 39 Pa 806 cfm at 0.17" WG		1883 cmh at 25 Pa 1108 cfm at 0.11" WG
0.5 m/s (100 fpm)		1070 cmh at 36 Pa 630 cfm at 0.15" WG		1391 cmh at 47 Pa 819 cfm at 0.20" WG		1712 cmh at 61 Pa 1008 cfm at 0.26" WG		2354 cmh at 40 Pa 1385 cfm @ 0.17" WG
Exhaust Outlet Diameter		305 mm (12.0”)
Number of exhaust Collars		1						2
Fluorescent Lamp Intensity		930 lux (86.3 Ft-candles)		915 lux (85 Ft-candles)		886 lux (886 Ft-candles)		931 lux (86.5 Ft-candles)
Construction	Main Body	Electrogalvanized steel with Epoxy-polyester hybrid Isocide™
	Internal Liner WT (default)	Stainless Steel 304 (Optional upgrade to SS 316)
Sash Specifications	Sash material	Tempered Laminated and Framed Sash Glass
	Sash configuration	Vertical or Combination
	Sloping	5°
	Maximum Sash Opening	740 mm (29.1”)
Electrical	Cabinet Full Load Amps (FLA)	32A
	Cabinet Nominal Power	100W (lighting only)

Esco offers a variety of options and accessories to meet application requirements.
Additional services and electrical outlets.
Base cabinetry is available for worktop requirements and additional storage area in the laboratory.

EFI CE Certificate
pdf

UL Certificate

Fume Hood Combined Catalogue
pdf

Sellsheet, English
pdf

Sentinel XL

สิ่งอำนวยความสะดวก

Superstructure

Tri-wall construction for maximum robustness.
Internal chamber constructed of stainless steel 304 with coved corners. Option to upgrade to stainless steel 316 is available.
Chain and Sprocket Sash support system.
Hood lighting is pre-wired. Lighting is electronically ballasted, energy efficient, instant start. Typical light intensity on work surface is > 1076 lux in zero ambient conditions.
Reinforced work surface can hold loads of up to 15 kN/m² (2.175 lbf/in2).

Safety Features

Shaping vanes increase airflow "sweep" at the critical area at the sidewall to improve containment, especially when laboratory personnel walk fast in front of the hood.
Sash stop limits sash movement beyond 457mm (18"), 'encouraging' user to work at safe positions.
When sash is raised above 457mm (18"), it will automatically and gently fall back to the safe level (Esco's creep-down mechanism) unless held in place. This allows the sash to be raised temporarily to the full open position for set up of equipment and apparatus in the hood, while enforcing regular operation of the hood with lowered sash.
The sash creep-down mechanism can only be disabled with a key. This permits the laboratory manager or safety officer to restrict operations at sash openings above 457mm (18.0").
Sash key lock allows the laboratory manager to restrict access to fume hood.
The sash can also be locked down in the fully closed position with the key , in the event of a fume hood fault, facility shutdown, or, simply to restrict access to equipment set up in the hood.

Serviceability

Stainless steel internal work zone allows for easy cleaning of all surfaces.
Removable baffle system allows for thorough cleaning inside the hood.
Chain and sprocket system requires minimal service.

Safety Certified and Tested

All Esco fume hoods are manufactured for the most demanding laboratory applications.
Each Frontier Acid Digestion Fume Hood is tested to comply with ASHRAE 110:1995 and EN14175-3 standards.
Sash is clearly labeled with operating instructions and illustrations.

รุ่น

Model	220-240 VAC, 50-60 Hz, 1Ø	EFI-4UD4CW-8 2090081	EFI-4UD6CW-8 2090082	EFI-5UD4CW-8 2090171	EFI-5UD6CW-8 2090174	EFI-6UD4CW-8 2090172	EFI-6UD6CW-8 2090175
		EFI-4UD4VW-8 2090177	EFI-4UD6VW-8 2090181	EFI-5UD4VW-8 2090178	EFI-5UD6VW-8 2090182	EFI-6UD4VW-8 2090179	EFI-6UD6VW-8 2090183	EFI-8UD4VW-8 2090180	EFI-8UD6VW-8 2090184
	110-120 VAC, 50-60 Hz, 1Ø	EFI-4UD4CW-9 2090xxx	EFI-4UD6CW-9 2090xxx	EFI-5UD4CW-9 2090xxx	EFI-5UD6CW-9 2090xxx	EFI-6UD4CW-9 2090xxx	EFI-6UD6CW-9 2090xxx
		EFI-4UD4VW-9 2090xxx	EFI-4UD6VW-9 2090xxx	EFI-5UD4VW-9 2090xxx	EFI-5UD6VW-9 2090xxx	EFI-6UD4VW-9 2090xxx	EFI-6UD6VW-9 2090xxx	EFI-8UD4VW-9 2090xxx	EFI-8UD6VW-9 2090xxx
Nominal Size		1.2 meter (4’)		1.5 meter (5’)		1.8 meter (6’)		2.4 meter (8’)
External Dimensions (W x D x H)		1220 x 900 x 1725 mm (48.0” x 35.4”x 67.9”)		1525 x 900 x 1725 mm (60.0” x 35.4”x 67.9”)		1830 x 900 x 1725 mm (72.0” x 35.4”x 67.9”)		2440 x 900 x 1725 mm (96.0” x 35.4”x 67.9”)
Internal Work Area (W x D x H)		996 x 672 x 1240 mm (39.2” x 26.5”x 48.8”)		1301 x 672 x 1240 mm (51.2” x 26.5”x 48.8”)		1606 x 672 x 1240 mm (63.2” x 26.5”x 48.8”)		2216 x 672 x 1240 mm (87.2” x 26.5”x 48.8”)
Face Velocity	Sash Opening	Exhaust volume / static pressure required
0.3 m/s (60 fpm)	457 mm (18.0”)	542 cmh at 7 Pa 319 cfm at 0.03" WG		705 cmh at 9 Pa 415 cfm at 0.04" WG		867 cmh at 12 Pa 510 cfm at 0.05" WG		1192 cmh at 8 Pa 702 cfm at 0.03" WG
0.4 m/s (80 fpm)		723 cmh at 13 Pa 425 cfm at 0.05" WG		939 cmh at 17 Pa 553 cfm at 0.07" WG		1156 cmh at 20 Pa 681 cfm at 0.09" WG		1590 cmh at 14 Pa 936 cfm at 0.06" WG
0.5 m/s (100 fpm)		903 cmh at 20 Pa 532 cfm at 0.09" WG		1174 cmh at 26 Pa 691 cfm at 0.11" WG		1445 cmh at 28 Pa 851 cfm at 0.12" WG		1987 cmh at 22 Pa 1170 cfm at 0.09" WG
0.3 m/s (60 fpm)	736 mm (29.0”)	642 cmh at 13 Pa 378 cfm at 0.06" WG		834 cmh at 17 Pa 491 cfm at 0.07" WG		1027 cmh at 22 Pa 605 cfm at 0.09" WG		1412 cmh at 14 Pa 831 cfm at 0.06" WG
0.4 m/s (80 fpm)		856 cmh at 23 Pa 504 cfm at 0.10" WG		1113 cmh at 30 Pa 655 cfm at 0.13" WG		1369 cmh at 39 Pa 806 cfm at 0.17" WG		1883 cmh at 25 Pa 1108 cfm at 0.11" WG
0.5 m/s (100 fpm)		1070 cmh at 36 Pa 630 cfm at 0.15" WG		1391 cmh at 47 Pa 819 cfm at 0.20" WG		1712 cmh at 61 Pa 1008 cfm at 0.26" WG		2354 cmh at 40 Pa 1385 cfm @ 0.17" WG
Exhaust Outlet Diameter		305 mm (12.0”)
Number of exhaust Collars		1						2
Fluorescent Lamp Intensity		930 lux (86.3 Ft-candles)		915 lux (85 Ft-candles)		886 lux (886 Ft-candles)		931 lux (86.5 Ft-candles)
Construction	Main Body	Electrogalvanized steel with Epoxy-polyester hybrid Isocide™
	Internal Liner WT (default)	Stainless Steel 304 (Optional upgrade to SS 316)
Sash Specifications	Sash material	Tempered Laminated and Framed Sash Glass
	Sash configuration	Vertical or Combination
	Sloping	5°
	Maximum Sash Opening	740 mm (29.1”)
Electrical	Cabinet Full Load Amps (FLA)	32A
	Cabinet Nominal Power	100W (lighting only)

อุปกรณ์

Esco offers a variety of options and accessories to meet application requirements.
Additional services and electrical outlets.
Base cabinetry is available for worktop requirements and additional storage area in the laboratory.